Operation Manual

CAMTVI7/CAMTVI7W
V. 02 – 10/02/2016 4 ©Velleman nv
4. Features
 weatherproof
 with B/W night vision (IR LEDs)
 1080P video signal
 vandal-proof bracket
5. Overview
Refer to the illustrations on page 2 of this manual.
1
IR LEDs
5
bracket
2
lens
6
zoom and focus adjust
3
light sensor
7
camera bolt
4
sunshield
6. Hardware installation
Refer to the illustrations on page 2 of this manual.
 Choose a location for the camera, keeping following guidelines in mind:
o do not install the camera in locations where extremely high or low
temperatures or excessive vibrations may occur.
o avoid mounting the camera near high electro-magnetic fields.
o do not aim the camera at the sun or other extremely bright objects
or reflections (e.g. metal doors).
 Use the mounting bracket [5] to determine the location of the mounting
holes. Drill the holes and secure the bracket [5] using screws.
 Attach the camera to the mounting bracket [5] with the camera bolt [7].
 Connect the two wires for an analogue PAL signal; leave them
unconnected for a HD 1080P TVI signal.
 Connect the power connector [B] to the 12 VDC power supply (not incl.).
 Connect the BNC connector [A] to a monitor (not incl.).
 Point the camera towards the field of interest and tighten the position bolt.
 Manually adjust the zoom and focus with the screws [6].
7. Technical specifications
IP rating
IP66
pick-up element
1/2.9" Sony Exmor CMOS image sensor
pixels
1920 (H) x 1080 (V)
resolution
1080P video
DSP
Techpoint (TP2801) & Fullhan chip (FH8531)
min. illumination
0.001 lux
IR LEDs
24
IR-cut filter
yes
max. IR projection distance
20 m