Technical data

PAGE 53
Operation via Windows PC Software
5.6.4.1.7 DTMF Event Labels
DTMF Event Labels
Under DTMF Event Labels you can define the so-called Event Labels for the
DTMF Event Mode.
FIG. 34 DTMF EVENT LABELS
The DTMF Event Mode is described in detail in CHAPTER 6 (see Page 93).
5.6.4.1.8 Relay / TTL
The MAGIC TH6 system incorporates six GPIO Pins (TTL) which can be pro-
grammed separately as input or output. Additionally, four Relays are availa-
ble.
The operating mode of a TTL Pin - Input or Output - is selected via the option
Direction.
The following specification accounts for all configuration windows TTL1,
TTL2, TTL3, TTL4, TTL5 and TTL6.
NOTE
This menu will only be displayed if the fee-based DTMF Tone Analyzer
Plug-In software option (see CHAPTER 6, Page 93) is enabled in your sys-
tem.