Technical data

PAGE 45
Operation via Windows PC Software
Mode
•Under Operation Mode you can select your mode of operation for the
MAGIC TH6:
– 1 Studio: One Fader: one ON AIR Audio line is configured for the
connection to the mixing console. If the conferencing option is enabled,
all callers are mixed together and are available as common Audio out-
put signal. The return signal from the mixing console shall contain the
Audio signal of the program presenter without caller signals. The mix
minus signals for all callers are generated in the MAGIC TH6 and pro-
vided as individual return signals to the callers. This mode provides a
single ON AIR button.
– 1 Studio: Two Faders: two ON AIR Audio lines are configured for the
connection to the mixing console. The callers can be switched to the
separate ON AIR lines ON AIR 1 or ON AIR 2. If the conferencing op-
tion is enabled, all callers who are switched to the ON AIR 1 status are
mixed together and provided as a common signal to the mixing con-
sole. The same is true for callers who are switched to the ON AIR 2 line.
The return signals from the mixing console shall contain the Audio sig-
nal of the program presenter without caller signals. The mix minus sig-
nals for all callers are generated in the MAGIC TH6 and provided as in-
dividual return signals to the callers. This mode provides two ON AIR
buttons ON AIR 1 and ON AIR 2
– 1 Studio: Six Faders: six ON AIR Audio lines are configured for the
connection to the mixing console. Each caller is switched to separate
ON AIR line and provided on the ON AIR 1 to ON AIR 6 Audio lines
to the mixing console. The return signals from the mixing console shall
contain the Audio signal of the program presenter without caller sig-
nals. This mode is indicated by the six ON AIR buttons ON AIR 1 to ON
AIR 6.
– 2 Studios: One Fader: same as the 1 Studio: One Fader mode but the
caller lines can be split between two studios; you will have a separate
On Air line for Studio 1 and a separate Audio line for Studio 2.
– 2 Studios: Two Faders: same as the 1 Studio: Two Faders mode but
the caller lines can be split between two studios; you will have two sep-
arate On Air lines for Studio 1 and two further separate Audio lines for
Studio 2.
• To allow Pretalk or/and ON AIR conferences, the options PRE TALK
Conference or/and ON AIR Conference must be enabled. If you do not
activate these options, only one caller is allowed to be in Pretalk or/and
ON AIR at a time. As soon as a second caller is switched to Pretalk or ON
AIR, the first caller is automatically switched to HOLD.
• To call out without signalling the phone number to the partner, you can se-
lect the option Anonymous Calling.
• Studio 1 first channel: Here you can select how many channels you
would like to display for Studio 1 and which channel should be the first.
• Studio 2 first channel (only displayed if you have selected an operating
mode with two studios): Here you can select how many channels you
would like to display for Studio 2 and which channel should be the first.
• Voice Disguise: The
Voice Disguise function distorts the caller signal so
that he/she cannot be recognised. If you activate this feature, it applies to
all caller lines. The red Voice Disguise button will be displayed on the right
side of each caller line (see Page 34). You can configure the sound of the
Voice Disguise function under Signal Processing (see CHAPTER
5.6.4.1.3, Page 48).