Technical data

PAGE 39
Operation via Windows PC Software
5.5.1.11 Night Service button
The Night Service button is only available if you have configured the Night
Service under Operation Settings → Night Service (see CHAPTER
5.6.4.1.6, Page 52). If the Night Service is switched on, calls will be automati-
cally forwarded to a preselected phone number. To switch it off, press the
Night Service button again or use the Switch Off button of the Night Service
window.
FIG. 19 NIGHT SERVICE SWITCHED ON
5.5.1.12 Load Preset button
After selecting the LOAD PRESET button a list of all available Presets will be
displayed. If a Preset is selected, the corresponding configuration will be
loaded in MAGIC TH6.
5.5.1.13 Reset DTMF button
The RESET DTMF button is only displayed if the fee-based option DTMF
Tone Analyzer Plug-In (ID: 430441) is available and if you have selected
Standard or Game Show under Configuration
→ DTMF Settings. Further
details you will find in CHAPTER 6, Page 93.
NOTE
To configure Pretalk Streaming for your PC-Client, you need to select an IP
Stream as Pretalk source for your PC under Operation Settings
→ Mode &
Audio Line (see CHAPTER 5.6.4.1.1, Page 44) and configure the Audio in-
put/output for Pretalk Streaming under Local Settings
→ Pretalk Stream-
ing (see CHAPTER 5.6.7.2, Page 81). Here you can also select where you want
to save the recordings. Please ensure also that the correct Pretalk Steraming
Udp ports are entered under System Settings
→ LAN Interface (see
CHAPTER 5.6.4.2.8, Page 70).