Technical data

PAGE 27

Front Display and Keypad Operation

–

Load Factory settings

: This function resets the system into the standard

settings. Presets are not deleted.

4.1.4 RS232 Interfaces

MAGIC TH6 provides two RS232 interfaces:

RS232 interface 1 is always configured for the connection of an external key-

pad with the following parameters 9,600 bit per second, 8 data bits, no parity

and cannot be changed.

RS232 interface 2 can be configured for the connection of an external keypad

or a PC.

– To configure the RS232 interface 2 press the

softkey and select

System

Settings

– Go to the

General

submenu and select

RS232/KEYPAD 2 ( PC )

. Now you can

select the required baudrate and parity.

NOTE

If the Preset has changed, you are asked if you want to

save settings

when

you leave the Preset menu. Via the

yes

softkey the configuration is stored in

the system. This Preset is loaded automatically by the system after the unit is

connected with the power supply.

NOTE

If you configure the RS232/Keypad 2 interface for the use with a PC, the PC

control via the LAN interface will be deactivated.