Technical data

PAGE 86
MAGIC TOUCH Software
7.7.3.9 Audio Level
The nominal Audio levels can be set separately for the input and output of
each system. The input level for Master/Slave systems is selected in Level In.
Correspondingly, the output level can be configured in Level Out. For the
nominal level the values
0 dBu, 3 dBu, 6 dBu and 9 dBu
are available.
FIG. 56 AUDIO LEVEL SETTINGS
If the Audio level of the callers is, on average, too quite or too loud, the level
can be increased or lowered down by the Incoming caller signal offset func-
tion.
After pressing the OK button, the settings are accepted.
The Cancel key deletes all settings.
L
The head room is 6 dB. Therefore, if the nominal level is 9 dBu a maximal
level of 15 dBu can be achieved.
L
Please note that the head room is decreased when increasing the level and
vice versa.