Technical data

PAGE 73
MAGIC TOUCH Software
7.7.3.4 S
0
Line
FIG. 46 S
0
-LINE SETTINGS
After pressing the OK button, all settings are accepted.
The Cancel key deletes all settings.
7.7.3.4.1 General
The Number of B Channels visible parameter indicates how many lines will
be displayed on the user interface. The allowed range is given in brackets.
In most cases, the presenter accepts a call manually. If it is desired for certain
kind of shows that the Telephone Hybrid accepts the call automatically the
Auto Answer Call option must be active. The callers are automatically put in
the Hold mode.
The Suppress ISDN error message option prevents the display of ISDN error
L
In the case that only a maximum of 5 lines can be set, even though a Master
and a Slave system is connected and only one call forwarding is installed,
then the problem results from the screen resolution. The resolution is either
limited to 800 x 600 pixels or the Display Settings
→ Use 800 x 600 resolution
option (see CHAPTER 7.7.3.1.6, page 66) is active by accident.
L
If the Next mode is selected (see CHAPTER 7.7.3.1.1, page 59) the automatic
call answer is generally active.