Technical data

PAGE 46
MAGIC TOUCH Software
7.5.1.4 Manual Call
7.5.1.4.1 Manual call by entering the telephone number
The operating key opens the dialog for manual dialling.
FIG. 21 DIALOG FOR MANUAL CALL
The telephone number is entered by the ... keys.
Alternatively, the keypad of the PC can also be used. The connection is estab-
lished by pressing the Enter button . If the connection is established via the
Enter button the caller is always put in the Hold mode.
Key deletes the complete entry, key deletes only the last character of
the entry.
The establishment of the connections is activated by pressing either the
(Pre Talk) button, the (Hold) button or by pressing the (On Air) but-
ton. Automatically, the next available line is used.
To close the dialog without establishing a connection, press key .
These six keys are programmable quick dial keys. They can be pro-
grammed via the Quick Dial system configuration (see CHAPTER 7.7.3.8,
page 84).
L
If no telephone number is entered, either the manual dial panel or the tele-
phone book (depending on the Miscellaneous settings (see CHAPTER
7.7.3.1.8, page 68)) will be opened. Therefore the temporary call forwarding
is possible to any destination.
This function is a good possibility for the call forwarding destination. Enter
for example ’Manual’ as Name to keep the function in mind.
L
In the case that the Telephone Hybrid system is operated through a PABX,
the prefix number (the number is usually "0") has to be entered for external
calls (see CHAPTER 7.7.3.4.3, page 75).