Technical data

PAGE 39
MAGIC TOUCH Software
7 MAGIC TOUCH SOFTWARE
The configuration of the system is done by the Windows PC software MAGIC
TOUCH, included in the delivery.
7.1 Hardware requirements
The PC must have the following minimum requirements:
– IBM PC AT, IBM PS/2 or 100% compatible
– Pentium Processor (> 266 MHz) recommended
– Windows 95B/98/ME/2000/XP operating systems
– 5 MB available hard disk space
– screen resolution of 1024 x 768 or restricted to 800 x 600 pixels (max. 5 caller
lines)
– at least one available RS232 serial interface
– Microsoft, IBM PS/2 or 100% software compatible mouse
7.2 Installation of the Windows PC Software MAGIC TOUCH
Insert the included disk in the disk drive and press the START button on Win-
dows 95B/98/ME/2000/XP. Select the sub menu item Run... and insert into
the command line
<drive name:>setup.exe
(e.g. A:setup.exe).
Follow the installation program instructions.
After the installation start the software , by clicking the MAGIC TOUCH
symbol.
Connect the PC via a null modem cable (pin 2 and pin 3 are crossed, pin
5=GND) to the system.
Turn the system on.
The red blinking ALARM LED signals that the system is booting. After ap-
prox. 45 seconds the LED stops blinking. The system is now ready for opera-
tion.