Technical data

PAGE 131
Option: MAGIC Hybrid Keypad
9.1 Working with the MAGIC Hybrid Keypad
Before operating the MAGIC Hybrid Keypad, the configurations of the MAGIC
TOUCH PC software - as described in CHAPTER 7.7.3.1.9 - have to be prop-
erly set.
9.2 LCD-Display
General information about the current connection status and the available B
channels is shown in the first line of the 2 x 20 character display. Following
displays are possible:
The second line changes its function according to the mode.
The last character of the second line always shows the status of the Pre Talk
interface. This interface can be used either with the optional handset (display
H) or with the analogue/digital (display A) XLR input. The switching of the
Pre Talk source is made with the key.
TAB. 8 INDICATION OVERVIEW OF THE FIRST LINE OF THE DISPLAY
Display Meaning
>>>> outgoing call
 incoming call
---- no connection
AIR caller is On Air
HOLD caller is in Hold
PRE caller is in Pre Talk
---> caller is being forwarded
<--- forwarding connection
OA 1
1
1
The MAGIC Hybrid Keypad 7 displays only A1 instead of OA 1 . The MAGIC Hybrid Keypad 12
displays only the character 1.
caller on Audio Line 1 is On Air
OA 2 caller on Audio Line 2 is On Air
OA 3 caller on Audio Line 3 is On Air
OA 4 caller on Audio Line 4 is On Air
PR 1
2
2
The MAGIC Hybrid Keypad 7 displays only P1 instead of PR 1. The MAGIC Hybrid Keypad 12
displays simply the character P.
caller on Audio Line 1 is on Pre Talk
PR 2 caller on Audio Line 2 is on Pre Talk
PR 3 caller on Audio Line 3 is on Pre Talk
PR 4 caller on Audio Line 4 is on Pre Talk
PR 5 caller on Audio Line 5 is on Pre Talk
PR 6 caller on Audio Line 6 is on Pre Talk
???? undefined condition
HANDSET
INPUT