Technical data

PAGE 129

Option: MAGIC Hybrid Keypad

9 OPTION: MAGIC HYBRID KEYPAD

The optional MAGIC Hybrid Keypad can be used e.g. as a redundancy to the

system in parallel to the PC. The number of the presentable caller lines is lim-

ited to four with the MAGIC Hybrid Keypad 4. Correspondingly, with the MA-

GIC Hybrid Keypad 7 seven caller lines can be administered or with the MAGIC

Hybrid Keypad 12, twelve lines are available.

Connect the 9-pin SUB-D plug of the MAGIC Hybrid Keypad to the LSD inter-

face (see CHAPTER A4.4, page 146) of the MAGIC system. Since the MAGIC

Hybrid Keypad needs its own power supply, the included 5V mains must be

connected as well. If everything is setup correctly, the display lights up. After

the system

has been turned on and has booted, the message shown in the fol-

lowing figure can be seen on the display:

The following figure shows the control elements of the MAGIC Hybrid Keypad

4. MAGIC Hybrid Keypad 7 and 12 have the same functionality. Only the Lay-

out is different.

Please note that the MAGIC Hybrid Keypad 4/7/12 can not completely be used

as a compensation for the MAGIC TOUCH user interface. But the essential

functions are still available.

If the system was already turned on, press the „AC“ key once.