Technical data

PAGE 124
MAGIC TOUCH Software
7.12.3 ... I want to use the MAGIC Hybrid Keypad of the PC?
(1) Open the keypad settings in Configuration → PC Keypad. Set in RS232 Pa-
rameter
→ Port the PC COM Port to which the MAGIC Hybrid Keypad PC
will be connected.
Details can be found in CHAPTER 7.7.2, page 56.
(2) Store all settings by pressing the OK button.
(3) Connect the keypad to the COM interface of the PC. Do not forget to connect
the power supply of the keypads with the power socket outlet.
7.12.4 ... I want to use the MAGIC Hybrid keypad as a redundant mode?
(1) Open the configuration dialog with Configuration → System → Edit and click
on the General link. Set the keypad type Keypad connected to Hybrid.
Details can be found in CHAPTER 7.7.3.1.9, page 68.
(2) Connect the keypad to the LSD interface of the Master system. Do not forget
to connect the mains power unit of the keypads into the power connector.
L
Windows NT4.0/2000/XP User
When using Windows NT/2000/XP, the setting of the COM port is only pos-
sible when logged on as Administrator. Otherwise, the settings can be
changed but they will not be accepted.
Log on as administrator when making a configuration.