Technical data

PAGE 105
MAGIC TOUCH Software
7.7.3.16.1 Sending of a message
Send a message by simultaneously pressing the key combination CTRL+W in
the main window or CTRL+W (W for Write) on the PC keypad. Alternatively,
the Messaging
→ Write Pop-up Message submenu can be used.
FIG. 70 MESSAGE VIA MENU SEND
The window opens to enter the message.
FIG. 71 POP-UP WINDOW FOR SENDING MESSAGE
The two left buttons support the addressing of the message. Normally, the
message is send to all users connected to the MAGIC TOUCH LAN and
MAGIC SCREENER . De-activate the relevant symbol to exclude a group.
Enter the message in the input field. Your identification (see CHAPTER
7.7.3.16, page 104) is prefixed automatically when sending the message.
By pressing the button the popup window closes without sending the
message. The message is sent via the key and the window closes after-
wards.
7.7.3.16.2 Received message
If the Show Pop-up message in Pop-up window option (see CHAPTER
7.7.3.16, page 104) is active, the popup window is opens when receiving a
message.
To open the message window manually, press the key combination CTRL+R
simultaneously in the main window, or CTRL+R (R for Read) on your PC
keypad. Alternatively, the Messaging
→ Show Pop-up Message Window sub-
menu can be used.
The message window opens and the last message(s) with the receiving time
is/are displayed.
Selection of
the message
MAGIC TOUCH LAN
and/or
MAGIC SCREENER
Input of the message Close
window
without
send
message
sending
message
MAGIC MAGIC
TOUCH
LAN
SCREENER
the receiver of