Technical data

PAGE 32
Windows PC Software
4.9.1 System configuration without keypad
Clicking Configuration -> System opnes system configuration window.
The configurations are summarized under different tabs. They are described
in detail for use without the keypad.
4.9.1.1 General Settings
FIG. 13 GENERAL SETTINGS
Keypad available
When using the MAGIC without the Hybrid Keypad this option must not be
set. This setting provides further functionalities as well as assignment of au-
dio interfaces.
Use Individual ON AIR Lines Mode
With this option the hybrid can be switched to individual mode. All callers
are then routed to their own audio interface. Now the hybrid can be used as
triple ISDN Telephone Hybrid.
S
0
Protocol
Choose the correct S
0
protocol. In most cases it is the EDSS1 (Euro ISDN).
NOTE The audio interface assignment table without keypad can be found in
CHAPTER A1, page 57.
NOTE This function is only relevant for systems equipped with AES/EBU Analogue
Modules (see Fig. 5, page 22)
NOTE The audio interface assignment table for this configuration can be found in
CHAPTER A1, page 57.