User Guide

List of components
C1, C2: ..............100 μF / 16 V !
Capacitors:
R1, R3, R4: ........2.2 kΩ
Resistors:
PR1: ....................mounting potentiometer 10 kΩ
IC1:......................78L05 !
R2:.......................1 kΩ
D1:.......................1N4007 !
Other:
Semiconductors:
HC-SR501 motion detector !
R5:.......................22 kΩ
LED1: ..................LED !
PH1:....................Photoresistor
C3, C4: ..............100 nF
IC2:......................IRL3705 !
IN, OUT: ............DG301-5.0/2
When mounting components marked with an
exclamation mark, pay attention to their polarity
Begin assembly by soldering the components
onto the board in order of size from smallest
to largest.
!
+ 12V - + 12V - + 12V - + 12V -
Figure 3. Example of connection
3
The self-assembly kits are intended for educational and demonstration purposes only. They are not intended for use in commercial applications. If they are used in such applications, the
purchaser assumes all responsibility for ensuring compliance with all regulations
AVT SPV reserves the right to make changes without prior notice.Installation and connection of the appliance not in accordance with the instructions, unauthorised modification of
components and any structural alterations may cause damage to the appliance and endanger persons using it. In such a case, the manufacturer and its authorised representatives shall
not be liable for any damage arising directly or indirectly from the use or malfunction of the product.
This symbol means do not dispose of your
product with your other household waste.
Instead, you should protect human health
and the environment by handing over your
waste equipment to a designated collection
point for the recycling of waste electrical
and electronic equipment.
Leszczynowa 11 Street,
03-197 Warsaw, Poland
https://sklep.avt.pl/
AVT SPV Sp. z o.o.
kits