Specifications

3000 series eurocard switchers.ib.rev21.doc Page 4 of 36 16/10/2007
Features of individual modules:
TPS-3010: Local tally panel. Fits any switcher in the series. Equipped with 5 tally LED’s. Provides visual
indication of switcher status when switcher is remotely controlled.
AVS-3010: Analogue video switch with looping inputs. Internal vertical interval switching or external
synchronisation for use in RGB, YUV & YC applications.
AVS-3011: As for AVS-3010, but with wire per crosspoint input patching and improved static immunity.
AAS-3020: Stereo analogue audio switch with looping inputs.
AAS-3021: As for AAS-3021, but with wire per crosspoint input patching and improved static immunity.
DDS-3030: RS422 / RS485 Serial bi-directional data switch. Only the selected bi-directional path is active at any
time with unselected data outputs reverting to tri-state. This allows switchers to be used in multiple
combinations (subject to logical conflicts).
DDS-3031: As for DDS-3031, but with wire per crosspoint input patching and improved static immunity.
DVS-3040: Serial digital switch. Primarily designed for 270 Mbit serial digital video with input equalisation to 50
metres. As no re-clocking is provided on this model, it may also be used for a variety of serial digital
signals over a wide range of data rates.
DVS-3041: As for DVS-3040, but with automatic input equalisation to over 200 metres, automatic muting of
unused inputs, wire per crosspoint input patching and improved static immunity.
CPS-3050: Local control switch panel. Fits any of the switchers in the series. Equipped with 5 push buttons with
tally LED’s and inserts for labels. In addition to providing local control and tally for the switcher to
which it is fitted this panel allows the switcher to act as a master for controlling other switchers.
CDC-3061: Priority logic control module. Integrates the functions of video detectors, priority encoder, local
control and remote interface for controlling 3000 series switchers in PIE and other path switching
applications. May be used with either video or audio or both types of signals. Allows control of a
traditional Main - Standby - Local arrangement.
CDC-3062: Priority logic control module. Similar to the CDC-3061, but with three levels of detection and
encoding for Main - Reserve - Standby - Local operation and greater remote control tally and
interfacing flexibility.
CPS-9000: Remote control panel. Controls one or more switchers in the series. Equipped with 5 push buttons
with tally LED’s and inserts for labels. Equipped with on board addressing to designate which bank
of 5 is controlled thus allowing formation of 10 x 1 and larger switchers. Multiple panels may be used
with tally to each panel.
May also be used as a switch data encoder for use with the CDC-3060 for remote control over serial
data links or for interfacing to external control systems.
CPS-9001: As for CPS-9000, but with improved static immunity. Wire per crosspoint connector provided for
external interfacing.
CPS-1050: Remote control panel - 1 RU. Controls one or more switchers in the series. Equipped with 10 push
buttons with tally LED’s and inserts for labels. Controls two 3000 series switchers for 10 x 1
operation. Multiple panels may be used with tally to each panel. Wire per crosspoint and tally
connectors are provided for external interfacing.
CPS-1052: Remote control panel - 1 RU. Controls one or more switchers in the series. Equipped with two banks
of 10 push buttons with tally LED’s and inserts for labels. Controls four 3000 series switchers for
20 x 1 operation or for 10 x 1 audio breakaway or as two separate 10 x 1 switchers. Multiple panels
may be used with tally to each panel. Wire per crosspoint and tally connectors are provided for
external interfacing.