User Manual
Table Of Contents
- Introduction
- Features
- In The Box
- Specifications
- Troubleshooting Lights - Transmitter/Receiver
- Troubleshooting Lights (HDBaseT Port)
- Transmitter Ports
- Receiver Ports
- IR Configuration
- Audio
- EDID Management - Transmitter
- EDID Copy Instructions
- RS-232 Configuration
- Troubleshooting
- Bandwith Chart
- Maintenance
- Damage Requiring Service
- Support
- Warranty
5
Troubleshooting Lights - Transmitter/Receiver
POWER
- On the front (Red).
·Light is ON = Power supply is connected and functioning.
·Light is OFF = Power supply is not connected or there is no power present. Verify connec-
tions, power supply, USP, Outlet, etc...
HDBT ACT -
On the front (Blue).
·Light is on (Flashing) = Normal operation.
·Light is o = The HDBaseT Chip is not active (verify power).
HDBT LINK -
On the front (Blue).
·This indicator shows that the AV HDBaseT Link between the Transmitter and the Receiver is
intact. This light should always be solid.
HDMI ACT -
On the front (Blue).
·Light is ON (Solid) = Sync with the HDMI Source/Display is correct and solid.
·Light is OFF = There is no HDMI activity detected on the HDMI INPUT/OUTPUT port.