User Manual


The Receiver
Back
Front
Indicator Troubleshooting Lights on the Receiver:
POWER - On the front: (Red) This is an indicator that the power is connected.
There are only two states for light:
• Light Is On = Power supply is connected and functioning.
• Light Is Off = Power supply is not connected or there is no power present. (In order to have power: check the
power supply, USP, Outlet, etc...)
HDBaseT
RS232
(COM & Pass-
through)
HDMI Out
48V
Digital Audio
Input
USB
Device
USB
Host
USB
Select Switch
PoE Setting
(Choose where PoE
Originates)
Micro USB
(Firmware)
IR In
IR Out
AV SYSTEM ACT - On the front: (Blue)
This is an indicator of activity on the link - this light will blink randomly as data is sent/received
HDBaseT LINK - On the front: (Blue)
This is an indicator that that the RJ45 HDBaseT Link is stable. This light should always be SOLID
HDMI SIGNAL MONITOR - On the front: (Blue)
This indicator shows that the HDMI source is connected. This Light should always be SOLID
If the
BLUE HDMI SIGNAL MONITOR LIGHT is OFF, check the following:
Audio In
Select
1. Try a longer HDMI cable. Some HDMI cables do not sync well at shorter lengths
2. Try another port on the Display if possible
3. Contact AVProEdge if these suggestions do not work
AC-EX40-444-PLUS
Page 8