User Manual

 IR INPUT to AC-EX400-444-PLUS-T (Transmitter) has two options
 IR OUTPUT (TX & RX)
IR OUT Emitter (Non-Flashing)
Set to the right, "I-PASS" to connect directly to a
control system
Set to the left, "EYE" Mode to use an IR Receiving Eye
IR IN w/ Receiver Eye

IR INPUT (RX)
*NOTE: You can extract audio at the Transmitter via the TOSLINK port. The source of the audio can either be HDMI (ARC), or
you can input via the TOSLINK port on the Receiver (see examples below and on the next page).

Audio Extraction on the AC-EX40-444-PLUS-T TOSLINK Port
This feature extracts up to 8ch Audio from the source device in order to be run to a separate amplifier or AVR. Both the
Transmitter and Receiver have "AUDIO SELECT" toggle switche that need to be set depending on how your INPUTING/
EXEXTRACTING audio.
AC-EX40-444-PLUS
Page 12