Installation Instructions

4
Name : __________________
Address : ______________________ City : ____________ State:_______ Zip:________
Telephone:__________________ Email:_________________
Upon completing the installation of an Mobility Bathworks walk in tub: the following activation form
must be completed , signed by both the customer and installer , and returned to Mobility Bathworks
In order for the warranty to be activated ( faxed, scanned or emailed, or hard copy mailed )
To be initialed by the installer(s)
____ Walk in Tub is leveled in all directions and all support legs are touching the ground
____ Walk in Tub is installed on a dedicated 30 Amp GFCI protected circuit using 10 gauge wire
____ Door Seal has been cleaned with rubbing alcohol to remove any dust or debris
____ Hand Shower Functions on all settings without leaking
____ Drain opens and closes properly, and the locking nut has been tightened on stopper
____ All jets and pumps function properly and all connections are water tight
____ All drain fittings have been checked for leaks white the tubs is draining
____ Unit is installed with access to both plumbing and electrical connections