Installation Instructions

32
Regular care of you Mobility Bathworks walk in tub will keep it clean and have it working at its best
for many years to come. The best way to counteract from detrimental affects occurring is to prevent
water from remaining on any finished surface on the Walk in Tub. Wipe down your Walk in Tub after
every use. Please clean out your spa system with Cascade every 2 weeks to keep spa system clean.
DO NOT under any circumstances use wire brushes, metal sponges, steel wool or scouring pads on
any part of your Mobility Bathworks Walk in Tub.
DO NOT under any circumstances use powerful solvents such as acetone, lacquer, paint thinner,
benzene or abrasive cleaner on any part of your walk in tub.
DO NOT use ammonia or chlorine based agents on any plated surface, as they will deplate the sur-
face and void your warranty.
DO NOT usa any liquids, powders or oils in the water if you have an air and/or hydro system.
Oil or Grease spots can be lifted with denatured alcohol.
Use liquid, non bleach dish washing detergent to remove and construction residue.
To restore luster to a dulled surface, lightly rub a liquid compound 9 such as a polishing compound
for cars ) followed by a light application of liquid or paste wax.
Cleans plated surface with warm water only.
It is strongly suggested to keep the door in an open position allowing the door seal to remain relaxed
while the tub is not in use to extend the lifetime of the door seal.