Installation Instructions

19
Installation of electrical components must be done by a licensed electrician.
Important : All units need a NEMA plug to be plugged into a GFCI outlet that is connected to a
separate circuit with a 20 AMP breaker run directly from breaker panel box.
*** Warning *** If the GFCI fails to operate, there is ground current flowing, indicating the possibility
of electrical shock. Do not use your walk in tub until a repairman has addressed the fault.
Before making any electrical connections, make certain that the electrical connection is turned OFF
at the breaker. Take precaution so as the breaker is not switched accidentally during installation
process.
All units with plug in motors and or heaters must be connected to a ( GFCI ) Ground Fault Circuit
Interrupter. This should be tested on a regular basis.
To test the GFCI, push the test button. Upon testing the GFCI should interrupt the power. Push the
reset button to restore power.