Installation Instructions

1. Remove the existing tub and the wall and floor materials as required.

2. Clean area of any debris or trash.

3. Use 4 Foot level and determine if the floor is level. If the floor is not level adjust all leveling feet

to perfect level the tub.

4. Make sure you level the Walk in Tub from the highest elevation point on the floor.

5. All leveling legs of the walk in tub must be resting on the floor evenly supporting the weight of the

bathtub, in order for the door to work properly without leaks.

6. Start by adjusting the outside legs and make sure they are level. Continue to adjust the legs by

adjusting the 2 ( two ) in the center of your walk in tub. Rough in your plumbing options before

leveling, as some options may cause clearance issues underneath the tub.