User Guide

4. Palettes - Page 55

PearlExpertTitan_Man_v3.doc 29/03/2010 13:28:00

4.3.2 Setting legends for palettes

You can enter a legend for each palette which is displayed on the

HUD.

1> Press the Palette button above the numeric keypad.

2> Press the grey preset palette button for the palette you want to

legend, or enter the palette number.

3> Press [Legend=xx] to change the legend.

4> Type the legend on the keyboard.

5> Press Enter when you have finished.

• The IPCGBES attribute

groups contained in the

palette are displayed

below your legend, so

for example Position

palettes will show a P,

colour palettes a C and

so on. The green N

refers to a “Normal”

palette rather than a S

for “Shared”.

• On the Touch Wing, the palette

number is shown top left. The

IPCGBES attribute groups contained

in the palette are displayed below

your legend, so for example Position

palettes will show a P, colour

palettes a C and so on. In the top

right corner is shown N for a Normal palette or S for Shared.

4.4 Copy and Move

4.4.1 Copying or moving a palette

Using the Copy button you can make a copy of an existing palette or

move it to a new button. You can copy or move multiple palettes in

one operation. You cannot link palette buttons.

Move is useful for tidying up the console.

1> Press the blue Copy button.

2> Select [Copy] or [Move]. Pressing the Copy button again will

also toggle these options.

3> Press or touch the Select button of the palette you want to

copy/move. You can select multiple palettes by holding the first

button and pressing the last of the range, or for touch buttons

by sliding your finger across the buttons.

4> Press or touch the empty Select button where you want it to

go.

• The ML Menu button latches the Copy/Move/Link menu, so you

can keep copying, moving or linking things without having to