Operator`s manual

Page 98 – 6. Shapes and Pixel Mapper effects
TitanUniversal_Man_v7-0_PE.doc 02 September 2013
1> Control the speed of the shape using the left hand wheel.
2> Control the size of the shape using the right hand wheel.
3> The size and speed is shown above the wheels on the display.
Other things to know about size and speed of shapes:
• If you are using the Touch Wing, the wheels on the console are
used to control size/speed, not the wheels on the Wing.
• If you have more than one shape running, the controls operate
on the most recent one. You can edit the parameters of any
shape that’s running using the Edit Shape function, see section
6.2.1.
• The minimum size is zero. This will “hide” the shape, and the
fixture will resume its previous settings. The shape is, however,
still active.
6.1.3 Changing the phase of a shape across multiple fixtures
Shapes get more interesting (and look more impressive) when you
apply them to multiple fixtures. You can control how a shape is
phased across several fixtures. You can also control Spread, which is
a different way of selecting the same thing.
The sequence of the shape across the fixtures is controlled by the
order in which you selected the fixtures when you created the shape..
1> Press softkey E to select [Adjust Phase and Spread]
2> Control the phase of the shape using the left hand wheel, or to
set in terms of Spread, use the right hand wheel.