Operator`s manual
5. Palettes - Page 89
TitanUniversal_Man_v7-0_PE.doc 02 September 2013
1> Press Clear, select some fixtures and locate them. If you need
to move them so you can see what’s happening, you can do
that too.
2> Press Time (previously Set button on Mobile/Sapphire, and Next
Time on Expert/Tiger).
3> Change Fade time to 2 sec. This sets the global fade time into
the programmer.
4> Press Palette, [Record Palette].
5> If you moved the fixtures in step 1, press [Set Mask] and
exclude everything except Time.
6> Press a palette button to store the Time palette.
5.2 Recalling palettes
5.2.1 Recalling a palette value
To recall a palette value from a button, this is what you do:
1> Select the fixtures to be changed. Shared palettes can be set to
any fixture of the same type. Normal palettes will set individual
values to each fixture.
2> Press the Palette button you want to recall. The palette will be
set to the selected fixtures.
• You can make palettes fade over a time when you recall them,
see section
0 below.
You can also recall a palette by its number by typing the number on
the numeric keypad.
1> Select some fixtures.
2> Press the Palette button above the numeric keypad.
3> Type in the number of the palette you want to recall.
4> Press Enter or [Apply Palette].
• The [Apply Palette] softkey shows the legend of the palette
which will be applied.
5.2.2 Palette pages
To change the page of Palettes stored on the presets you use the
Pages of Fixtures buttons above the numeric keypad. If you want a
palettes to be locked on its handle and not change when the page is
changed, you can set a lock or transparent lock on the palette handle.
See section 7.6.4 on page 174 for more details about locks.
Each of the palette windows on the Touch Wing can either display
pages of palettes, with page buttons on the left, or a continuous
scrolling window of palettes. To change between pages and scrolling,
touch the Pages Show/Hide button in the context button area to the
left of the menu buttons. using the page buttons to the left of the
palette buttons.
• You can recall a palette from any page using its number as
described in the previous section.