Operator`s manual

5. Palettes - Page 87
TitanUniversal_Man_v7-0_PE.doc 02 September 2013
Palette touch buttons on the Touch Wing are completely
separate from palettes stored onto the preset handles,
unless the Groups and Palettes window is used – this
view duplicates the blue/grey preset buttons on the
touch screen and can be useful when transferring shows
from a Pearl Expert to another Titan console. See
section 12.1.4 on page 230 for more details.
5.1.4 Setting legends for palettes
You can enter a legend for each palette which is displayed on the
palette touch button; for palettes stored in the preset buttons the
legend is shown on the softkeys when palettes are recalled.
1> Press [Set Legend] at the top level menu.
2> Press the palette button for the palette you want to legend.
3> Type the legend on the keyboard.
4> Press Enter when you have finished.
• On touch buttons, the palette number is shown top left. The
IPCGBES attribute groups contained in the palette are displayed
below your legend, so for example Position palettes will show a
P, colour palettes a C and so on. In the top right corner is
shown N for a Normal palette or S for Shared.
You can create a picture legend for your palette which could for
example represent the colour or gobo it will create. After pressing
[Set Legend] and the palette button, press [Picture]. The picture
editor will open.
The tab buttons on the top left allow you to select Keyboard entry
(legend reverts to text), Draw, Icon Library, or Load File. On the right