Operator`s manual

4. Controlling dimmers and fixtures - Page 81
TitanUniversal_Man_v7-0_PE.doc 02 September 2013
Setting a time attribute value will cause the 'in programmer'
indication to light up.
The Channel Grid window has a Times context menu button which
allows you to view or edit all the attribute times currently in the
programmer. You can set a time to Off to temporarily disable it; the
On option will restore the previous setting.
You can try out time settings by pressing Avo Shift + Time or double
tap the Time button. (previously the SET button on Titan
Mobile/Sapphire Touch and the NEXT TIME button on Tiger
Touch/Pearl Expert).
4.2 Viewing and using numerical values
4.2.1 The Channel Grid window
It can sometimes be useful to display and edit exactly what each
fixture is doing. The Channel Grid window allows you do to that.
Display it by pressing
View then [Show workspace window] then
[Channel Grid].
The window can be set to different modes using the context buttons
to the left of the menu. The modes are:
• Playbacks: shows which playback is controlling each attribute of
each fixture
• Levels: shows the output levels of each attribute. These may be
shown numerically or as range names.
• Palettes: shows which palettes are allocated to fixture attributes
• Shapes: shows which shapes are running on fixtures
• Output/Programmer: switches between the attributes on the
console output, and the attributes currently in the programmer
• Highlight off/changes: if set to [Highlight changes] then
changing attributes will be highlighted.
• Narrow/Wide columns: changes the column width on the
screen.
You can select fixtures by touching the fixture names on the left of
the screen, or if you select any fixture values, the appropriate fixture
will automatically be selected.