Operator`s manual

Page 80 – 4. Controlling dimmers and fixtures

TitanUniversal_Man_v7-0_PE.doc 02 September 2013

4.1.22 Setting fixture/attribute times

Fade and delay timings can be directly set for each fixture or

individual attributes of a fixture. When you store the settings into a

cue, the time settings will then become part of the cue.

There are a number of ways to set the times:

• You can set individual attribute times by switching the wheels to

Fade Time / Delay Time mode using the [Wheels=] softkey on

the root menu.

• Individual attribute times can also be set using a combination of

the wheel @ keys and the TIMES key.

• They can also be set by selecting fixtures and entering into the

attribute times sub-menus from the TIMES key.

• There is also command syntax that allows various options to set

attribute time values - e.g. TIMES FIXTURE Position 5 @ 3

would set a 5s fade, 3s delay time onto the current fixture

selection P group. Wheel @ keys can also be used in the

syntax. Fan options are also available through syntax using

THRO.