Operator`s manual

4. Controlling dimmers and fixtures - Page 79
TitanUniversal_Man_v7-0_PE.doc 02 September 2013
colour mixing, tilt and dimmer.
• Pull Ends - The first and last selected fixture are affected most,
the midpoint is unchanged. This is useful for colour mixing, tilt
and dimmer.
• Arrow - The first and last selected fixture are affected equally to
the midpoint fixture but in the opposite direction. This is useful
for colour mixing, tilt and dimmer
.
Fan Parts
When using the Fan function you can split the fan into a number of
groups. Select all the fixtures, hold down Fan and type a number on
the numeric keypad. The Fan will divide into that number of parts, for
example:
Normal (1):