Operator`s manual

4. Controlling dimmers and fixtures - Page 69
TitanUniversal_Man_v7-0_PE.doc 02 September 2013
Updated personality files may be required to support the
keystone/blade functions.
When the selected fixture has subfixtures, buttons appear at the top
of the attribute editor window allowing you to select the main fixture,
or individual cells for control.
4.1.7 Setting attributes from the softkeys
You can directly enter a numeric value for the attributes which are
live on the wheels. You must be at the main Program menu to do this
(keep pressing Exit until the vertical menu bar shows “Program
Menu”).
Type a number on the numeric keypad then press one of the softkeys
to set the value to the fixture. The Softkey legend will show what
effect your value is going to have (such as [Gobo 5], or [Deep Blue]).
For attributes displayed in percent, such as Dimmer, or Colour Mix,
you enter a value from 0-100 to set the percentage output. For