Operator`s manual

4. Controlling dimmers and fixtures - Page 67
TitanUniversal_Man_v7-0_PE.doc 02 September 2013
Press
View then [Open Workspace Window] then [Attribute Editor] to
show it. As a shortcut you can also show it by touching the attribute
name text just below the IPCGBES buttons (for example Colour Func
in the above picture).
The buttons on the left of the window select the attribute to change.
The rest of the window contains buttons or controls to set the
attribute value. For attributes such as gobos and fixed colours, a
button is provided for each one, making selection a lot quicker than
scrolling through on a wheel.
When you apply an attribute, the button turns blue to show that the
attribute is in the programmer. If you touch the button again, the
attribute will be removed from the programmer.
Touching the title of each attribute (such as “Colour Func”) expands
the attribute to the full window, displaying more buttons.
For fixtures which are capable of colour mixing, you can select a
colour from an onscreen palette of colours. The slider on the right
hand side sets the intensity.
Touch here to open
attribute editor
Touch here to change
attribute bank
Touch here to change attribute
values up and down