Operator`s manual

Page 66 – 4. Controlling dimmers and fixtures
TitanUniversal_Man_v7-0_PE.doc 02 September 2013
The touch display above the wheels shows the attribute bank
(Intensity, Position, Colour and so on) and the current values on the
wheels.
Touch the attribute bank buttons to change to a different bank. You
can also use the attribute bank buttons down the right hand side of
the console as usual. The current attribute bank is shown with a grey
background.
If attributes have been modified, the attribute button has a pale blue
highlight.
The Roller display shows the attributes available on each wheel.
These may be shown as a percentage value, or named values for
attributes with fixed positions such as a colour wheel. If the attribute
has been modified, the current value in the programmer is
highlighted in blue.
You can touch the roller image to change the attribute value up or
down by one. For continuously variable controls like a dimmer,
touching the roller will set the attribute to full or zero.
Attribute editor window
For attributes with fixed values such as gobos and fixed colour
wheels, the Attribute Editor window can be easier to work with than
the wheels. It also offers a colour picker window for fixtures with RGB
or CMY colour mixing.
Touch here to open
attribute editor
Touch here to change
attribute bank
Touch here to change attribute
values up and down