Operator`s manual

3. Patching - Page 51
TitanUniversal_Man_v7-0_PE.doc 02 September 2013
using the LCD screen. If you do have a Touch Wing, the Patch View
workspace described above in section 3.2.1 gives you more control.
To open the fixture patch view, press the white View button (next to
the numeric keypad) followed by [Fixture Patch]. You will get a table
on the touch screen showing all your fixtures. The list of fixtures can
be filtered by typing in a search term on the keyboard. You can also
use the wheels to scroll around the list and select different fixtures, or
touch the list or one of the fixture buttons. As you select a fixture its
button will be highlighted in red.
You can edit the selected item by pressing [Edit]. This option toggles
between [Edit] and [Search] modes.
• Please note that some values are input in the following form:
-Handle Number: {Page}.{Index}
-DMX address: {Universe}.{Address}.
• You can choose which columns are displayed by pressing
[Columns] and choosing which columns to hide or show.
You can Park a fixture by moving to its DMX address and deleting the
address using the left arrow key (or backspace on the keyboard).
3.2.6 DMX view window
When you’re having problems getting fixtures to work it can be useful
to see the actual DMX output values coming from the console. Press
View, then [Open Workspace Window], then select [DMX].