Operator`s manual

Page 50 – 3. Patching
TitanUniversal_Man_v7-0_PE.doc 02 September 2013
4> To change DMX press [Address], type the new address and
press enter. If this address is already in use, a warning icon will
be shown.
5> To change the DMX output line, press [DMX Line=x] and enter
a new output line number 1-12.
6> Press Enter or [Repatch] to confirm the change.
7> Repeat from step 3 if you want to change other fixtures.
• You can “Park” the fixture using [Park]. This removes the
fixture from the DMX output map, but all programming is
retained.
• If the new DMX address already has another fixture or dimmer
patched on it, the console will warn you (unless this is disabled
in User Options, see section
12.3.3 on page 198). You can
either press [Select another DMX address] to abort the change
or [Park Conflicting Fixtures]. All programming for the parked
fixture is preserved, but you need to repatch it to a free DMX
address using the above procedure before you can use it again.
If you press [Always Park Conflicting Fixtures] the console will
park this and any future conflicting fixtures without warning you
(you can change this option back in the User Settings).
3.2.4 Setting legends
You can set a legend for each fixture or dimmer you’ve patched
which is displayed in Fixture lists and in the Fixture Select touch
button if you are using the touch wing. This can be really useful to
help you identify the fixture.
1> At the main menu press [Set Legend].
2> Press the Select button for the fixture you want to legend.
3> Type the legend on the keyboard.
4> Press Enter when you have finished.
• You can also choose to have a picture legend using the softkey
options.
• You can set the same legend for multiple fixtures by selecting a
group of fixtures after pressing [Set Legend].
• You can automatically allocate User Numbers for multiple
fixtures by selecting a group of fixtures, then using softkey A on
the Set Legend menu. The first fixture will have the User
Number you entered, and the other selected fixtures will be
given a number increasing by 1 for each fixture.
• You can set a legend for the current page of fixtures using the
[Set Legend] function from the main Program menu. The
legend is shown on the touch button for the page and on the
HUD.
3.2.5 View Fixture Patch
If you don't have the Touch Wing connected, the fixture patch view
allows you to see and edit how fixtures are patched on the console