Operator`s manual

3. Patching - Page 49
TitanUniversal_Man_v7-0_PE.doc 02 September 2013
• You can add notes to each fixture in the Patch View. Click on
the Notes field and enter text using the keyboard.
The tabs across the top allow you to switch the window to Personality
List (lists all fixtures available on the console), RDM (allows you to
patch devices using RDM) and Attribute Behaviour (allows you to set
invert, freeze, curve, and limit. See section
3.4.2 and following
sections for Attribute Behaviour.
3.2.2 View detailed fixture information
In the Patch View window click on the View button for the fixture you
wish to view, or press
View followed by a fixture handle. A Fixture
View window will open showing details for that fixture, including the
personality and mode used to patch, and the individual DMX channel
addresses for each attribute. Attributes can be inverted or frozen by
clicking on the checkboxes at the right hand side.
If the fixture address is set using DIP switches, the console can show
you how to set the switches by clicking on the DIP Switches tab.
There is also a Personality tab (not shown in the pictures) which
shows history information about the personality file for the fixture.
This can be useful for checking the version of the personality file.
3.2.3 Changing DMX address using Patch menu
As well as using the Patch View screen, or if you don't have a Touch
Wing connected, you can use the Patch menu to re-patch a fixture to
a different DMX address or a different DMX output line. All
programming is kept.
1> Press Patch (if you’re not already in Patch mode).
2> Press [Repatch Fixtures].
3> Press the Select button of the fixture you want to change.