Operator`s manual

Page 40 – 2. Setting up and using the console
TitanUniversal_Man_v7-0_PE.doc 02 September 2013
the console which determines how the XLR sockets on the back
of the console are used and how DMX is sent over the network.
• There is also an option [Wipe] in the System menu (when the
console is in System mode) which has the same function, and is
located in the same place as on other Avolites consoles.
2.7 Creating reports
When preparing a show it is often useful to create a report of how the
show is patched or programmed on the console, for example to give
to a crew when pre-rigging fixtures, or just for your records.
Reports can be created in HTML, PDF, CSV or XML formats for the
following:
• Fixtures
• Memory (Cues)
• Chases
• Cue Lists
• Palettes
• Groups
To generate reports:
1> Press the Disk button.
2> Press [Reports].
3> Select the item(s) you want to include in the report
4> Select the format in which you want to output the report
5> Select the drive where you want to save the report
Reports are output to the Documents/Titan/Reports folder. When the
report is complete, Titan will open the folder where the report is
stored so you can see where it went.