Operator`s manual

Page 38 – 2. Setting up and using the console
TitanUniversal_Man_v7-0_PE.doc 02 September 2013
You can then select items from the imported show and store them
onto workspace or panel buttons in your current show.
1> Press the Disk button.
2> Press [Import Show] (The plus button at the top right of the
Show Library window also opens this menu).
3> The Show Browser window opens. Select the show you want to
import from and press [Load Show].
4> The Show Library window will now open. Your current show and
the imported show will appear as buttons at the top of the show
Import new show
Button for
imported show
Filter fixtures in
current show
Filter fixture list in
imported show
Fixtures in
imported show
Arrow shows
mapped fixture
Filter display of
items in show
The items which
can be imported