Operator`s manual

Page 34 – 2. Setting up and using the console
TitanUniversal_Man_v7-0_PE.doc 02 September 2013
2.3.10 Locking the console
You can lock the console controls to prevent people fiddling with it
while you’re not looking. Hold down Avo and press [Lock], then type
a password (numbers or letters). To unlock, enter the password
again, or restarting the console will also unlock it.
While the console is locked, all functions are disabled except the DMX
outputs and currently running playbacks.
2.4 Titan Simulator
Need to pre-program or tweak your show before you get to the
venue? No problem, just run the Titan Simulator on your PC. You can
then load your show and simulate any of the Titan consoles, using an
on-screen “virtual panel”.
You can also use the Titan One software without the Titan One dongle
as a simulator for pre-programming.
2.4.1 Installing Titan Simulator
You will need a user account with Administrator privileges to install or
run Titan Simulator.
From v7, Windows XP and Vista are no longer supported
by Titan software. Your PC must be running Windows 7
or Windows 8.
Simply download and run the installer from the Avolites Download
website. The first time you run Simulator you will need to license the
software with the Avolites website. For this you will need an account
set up on the Download site, which you should go and create now if
you don’t already have one.
To license the software, start Titan Simulator and choose Internet
Activation (the software will ask you for your Avolites Download user
name and password and automatically retrieve your license), or
Manual Activation (you have to copy and paste the Computer Key into
the form on the Titan Simulator webpage).