Operator`s manual

2. Setting up and using the console - Page 31
TitanUniversal_Man_v7-0_PE.doc 02 September 2013
2.3.5 Visualiser
The console runs Avolites Visualiser internally. This allows you to view
the output of the console if you can’t use the real lights, enabling you
to make changes to your show at home or in your hotel. It can also
be used in Blind mode for programming during a show.
Visualiser is shown in a workspace window, either on the Touch Wing
or on the external monitor. Press [Window Options] then [Move
Screen] on the View menu to move it between the touch screen and
external monitor.
Configuration controls for Visualiser are found by clicking the context
options button on the top right of the window, or if the Touch Wing is
attached, the buttons are shown to the left of the menu buttons.
The operation of Visualiser is not covered in this manual, please refer
to the Visualiser manual.
Auto Patch
The Auto Patch function automatically creates a Visualiser rig from
your show as you patch fixtures. When you start Visualiser, it will
open with an automatic representation of your patch.
You will see the fixtures laid out on screen, sorted by handle number.
The Visualiser will start in run mode, with the simulator tab selected
so you can start controlling lights immediately.
Multiple dimmers patched to one handle will appear as a singe fixture
in Visualiser.
Fixture selection
When a fixture is selected on the console, it is highlighted in blue in
Visualiser.
2.3.6 Key profiles
The console allows you to change the function of the blue select and
grey flash panel buttons. You can also change the way some of the
touch keys work. You can save your settings as a Key Profile.
Different profiles can be selected for different users or to enhance the