Operator`s manual

2. Setting up and using the console - Page 27
TitanUniversal_Man_v7-0_PE.doc 02 September 2013
Press View then a fixture select button to open the Fixture View
window showing patch details for that fixture.
Press
View then Connect to open the View Cue window.
Press
View then Off to open the Active Playbacks window.
Press
View then Macro to open the Macro window.
Workspace window options
You can change the window sizes and positions by clicking the small
‘i’ button in the top right corner of the window. These options also
allow you to set the button size and the text size of the window. The
Screen options may vary depending on the setup of the console and if
you have any external monitors.
Saving workspaces
You can save different workspace setups to the Workspaces touch
buttons (down the left side of the left hand touch screen by pressing
View then [Record Workspace], then touching one of the Workspaces
buttons. This allows you to reconfigure the workspace at the touch of
a button.
Workspaces are saved with the show.
Setting up and recording workspaces is described in more detail in
section
12.1 on page 193.
Quick record
Some windows – Groups, Workspaces, Playbacks, and
all the Palette windows - have a Quick Record function.
Set up what you want to record, then touch or click the
button once. The button will light up red with a + sign.
At this point you can enter a legend. Touch or click again to store the
item.
The Quick Record function can be disabled using Key Profiles (see
section
12.2.1 on page 196).