Operator`s manual

Page 26 – 2. Setting up and using the console
TitanUniversal_Man_v7-0_PE.doc 02 September 2013
Up to 4 windows can be shown on the screen in a 2x2 grid, but if you
need a larger view, you can make a window twice as big, or maximise
it to take up the whole screen. You can also move windows to an
external screen which can show a further 4 windows. Some possible
window sizes/positions are shown below.
Quarter size Double wide Double height Maximised
Some windows have associated control buttons, these are positioned in
the 'context buttons' area on the top right of the screen. If the Touch
Wing is not connected, a drop down context menu is available at the top
right of each window.
Selecting and positioning workspace windows
You select which workspace windows you want to see using the
[Open Workspace Window] menu command on the root menu, or by
pressing the Window Selection buttons on the Touch Wing.
You can also press the
View button to access the [Open Workspace
Window] option while in another menu.
You can change the positions and sizes of the windows by using the
Window Control buttons . The min/max button swaps the active
window between full screen and quarter size. The size/position button
moves the active window around the possible positions. You make a
window active by clicking/touching its header bar.
You can move the active window to a different monitor by pressing
Avo and the Size/Position button, or
View then [Window Options]
then [Move Screen].
Window shortcuts
Press
View then an Attribute Bank button to open the Palette window
for that attribute.
Press
View then Patch to open the Patch View window.