Operator`s manual

17. Glossary of terms - Page 253
TitanUniversal_Man_v7-0_PE.doc 02 September 2013
TRACKING Describes the operation of Cue Lists where lighting
states follow through from previous cues unless
changed by the user.
TRIGGER POINT The level set in the User Settings which determines
at which point a Playback Fader triggers the LTP
Channels programmed onto it.
UNFOLD A function that allows Chase Steps to be laid out onto
Playback Faders for easy editing.
USER SETTINGS User definable desk settings. To change them, hold
down the Avo button and select [User Settings].
VIRTUAL DIMMER Used with LED RGB (red-green-blue) colour mixing
fixtures, these add an intensity function to the fixture
which masters the RGB controls on the fixture when
it does not actually have an intensity control channel.
WIPEALL A process which clears all the previous programming
out of the desk, but does not touch the System
Software.
WHEEL Wheels are used on the console to set Fixture
Attributes and to control chases and cue lists (see
FUNCTION WHEEL).