Operator`s manual

16. Release notes - Page 247
TitanUniversal_Man_v7-0_PE.doc 02 September 2013
Palettes on celled fixtures: Sometimes when applying palettes
stored on celled fixtures the applied palette would not output as
recorded.
Cue list copy ignoring tracked value: When copying a cue list the
tracking information was not being copied correctly which rarely
resulted in the cue list outputting incorrect levels.
Changing IP address stopped Art-Net: Changing the console IP
Address would stop Art-Net output until you refreshed the settings.
Autosave disabled lost after restart: The autosave enabled
setting would sometimes reset after restarting the console.
Patch view failed to initialise: Sometimes when opening the patch
view window you would see a failed to initilise error. Re-opening the
window would fix.
Record by stage on celled fixtures: Record by stage would not
record fixtures where only the master had intensity.
Colour wheel shapes not working: Shapes that used a fixtures
colour wheel would not run correctly.
Update personality and user number selection: After you
updated a personality for a fixture you were no longer able to select
that fixture by user number.
Occasional pause in shapes and pixel mapper: Very occasionally
and after a while of the console being on you may see a brief pause
of around 500ms in all shapes and pixel maps. This would more often
than not appear when firing or killing other playbacks.