Operator`s manual

Page 234 – 16. Release notes
TitanUniversal_Man_v7-0_PE.doc 02 September 2013
Cuelist Fire First Cue: In Playback Options for Cue lists there is a
new softkey toggle to enable/disable firing the first cue. When
enabled the first cue will immediately go as soon as the cue list is
fired. Default is disabled.
Disable Cue List Cue: Cues in cue lists now have a new 'disable'
option. When a cue is set to disabled it will be skipped. This provides
a way to temporarily remove a cue with the ability to reinstate later if
required. On touch consoles disabled cues are 'greyed out' in the
connected wheel display.
Flash with times: A new key profile option is available to flash with
times.
Effect Palettes: It is now possible to record effects in palettes.
These effects can then be applied to any group layout. Any changes
to effect palettes recorded in cues will update the associated cues.
Palettes on TT executor buttons: It is now possible to record
palettes on the Tiger Touch macro/executor buttons.
Remove Fixture from Cue: It is now possible to completely remove
a fixture from a cue - View the cue, select the fixture(s), [Remove
Fixtures],[Confirm].
OFF Playbacks: It is now possible to directly turn off
fixtures/attributes and remove fixtures from shapes in playbacks.
Press OFF followed by a playback to open the 'Off Playback with Mask'
menu. Select fixtures, set mask as required and then press [Off] to
turn the fixtures/attributes/shapes off.
Note that for consoles that do not have separate Release and Off
buttons pressing Off followed by a playback will release it. In these
cases select [Off Playback Values] then select playback.
Add Fixtures to Shapes: There is a new context menu option in
Shapes Fixture View called 'Add Fixtures'. This provides a direct way
to add more fixtures to a shape in an existing cue. After selecting the
context menu option, select fixtures you want to add and then press
the [Add Fixtures] softkey to add.
Patch View Column Filters: There is a new context menu option in
Patch View called 'Choose Columns'. Pressing this will open a menu
where you can toggle columns on/off for the patch view. This is useful
to help simplify the view or to ensure particular columns are visible
when using smaller window sizes and/or displays.
Patch View Notes: You can now add notes to fixtures in the patch
view.
View Fixture History: There is a new tab in Fixture View called
'Personality'. When selected this will display the personality's history.
This can be useful for checking versions and changes.
Reset Masters: You can now reset any master to its default level by
pressing release (or OFF) followed by the master. If the master is
assigned to a fader you must level match to regain control.
Disable DMX Output: It is now possible to disable/enable DMX
output from the shift (Avo) menu. This is particularly useful in backup
situations, for example two consoles outputting to Art-Net or if
physical DMX outputs are merged.