Operator`s manual

12. User Settings and other options - Page 201
TitanUniversal_Man_v7-0_PE.doc 02 September 2013
You can individually assign Nodes to Lines using the arrow button, or
assign all Nodes of the same type using the group assign button. For
example, to assign each XLR output socket on the back of the console
to a DMX line, you would click on the Group Assign button of the
ExpertDMX nodes.
To assign a node to a line, click on the arrow on the node (the node
will be highlighted), then click the line you want to assign to it.
To delete a node from the DMX lines, click on the X button. To delete
all nodes from a line, click on the Group delete button
You can show information about the DMX nodes, or the DMX lines, by
clicking the i button. For Ethernet/network type nodes, this allows
you to set detailed properties such as IP address ranges and net
masks.
If you have further networked DMX processing nodes connected,
these can be individually configured using the tabs across the top of
the screen.
Group delete Individual delete
Group assign Individual assign