Operator`s manual

Page 20 – 2. Setting up and using the console
TitanUniversal_Man_v7-0_PE.doc 02 September 2013
The Touch Wing
The optional Touch Wing uses a touch screen and additional wheels to
provide a user-friendly interface for selecting fixtures, palettes,
groups and setting attributes.
• The main area of the Touch Wing shows up to 4 workspace
windows. You can select the content and configure the size
and layout of these windows using the Window Selection and
Size/Position buttons below the screen.
• The arrangement of windows can be saved and recalled using
the Workspaces touch buttons on the right of the screen.
• Some windows have additional command buttons which are
displayed in the Context touch buttons area on the top right
of the screen when the window is active.
• The three Attribute Wheels take over attribute control from
the wheels on the console, which are then used for speed/fade
control of chases. Below the wheels the Scroll Mode Button to
switch the wheels into scroll mode – this is used to move a
selection box around the screen when editing.
• The Attribute Display shows which attributes are being
controlled by the wheels, and the current settings. Touching the
roller graphic will set the attributes to min or max.
• Across the bottom of the screen there is an area showing
information about the playbacks on the current roller pages.
Macro buttons
Attribute wheels
Window selection
buttons
Workspace
windows
Context
touch buttons
Workspace
save/recall
touch
buttons
Attribute display
Window size/position
buttons
Playback info