Operator`s manual

10. Running the show - Page 177
TitanUniversal_Man_v7-0_PE.doc 02 September 2013
• When a group master is set to disabled or moved to a handle
without a fader, it will become locked at the current fader level.
Re-enable or move back to a fader to adjust the level.
10.1.7 Flash and swop buttons
The Flash and Swop buttons on the playback faders may be used at
any time to flash and solo cues and chases. The Flash button adds
the playback into the current output, the Swop button turns off all
other output. . The Flash button can also be set to Flash With Times
which will use the pre-programmed timings of the cue when flashing.
You can reallocate the functions of the Flash and Swop/Select buttons
on the console using Key Profiles – see section
12.3.4 on page 199. A
useful alternative function is Preload which allows you to pre-position
the attributes of the fixtures before you raise the playback fader,
which is handy for avoiding unwanted movements (any fixtures which
are already active in another playback will not change when you use
Preload). You can also allocate Go and Stop buttons for cue lists and
chases. To quickly change the key profile, hold Avo Shift and press
[Edit Key Profile].
The Touch Wing screen relating to
each playback faders shows the
allocated function of the blue and grey
buttons.
10.1.8 Playback priority
You can set playbacks to high priority if you do not want them to be
overridden by other playbacks using the same fixtures. For example,
if you have a couple of fixtures acting as a spotlight, but they are also
programmed into some colour washes, you probably want the
spotlight cue to take priority over the colour washes. See section
7.6.5 on page 142.
10.1.9 Locking a playback onto the same handle on every page
Sometimes you might want to keep a playback accessible on a handle
no matter which page you are on. The [Handle Paging] option in the
[Playback Options] menu lets you do that without having to copy the
playback onto multiple pages.
[Locked] ensures the playback always appears on that handle no
matter what page is selected. Any other playbacks programmed on
that handle on other pages will not be accessible.
[Transparent Lock] means the playback will appear on the current
page only if the handle is empty on that page. If a playback is
programmed in that position on the new page, then that playback will