Operator`s manual

Page 160 – 9. Cue Lists
TitanUniversal_Man_v7-0_PE.doc 02 September 2013
To manually edit autoloads:
1> Press [Playback Options] in the top level menu.
2> Press the blue Select button of the Cue List.
3> Press [Autoload].
4> The cues in the cue list are shown on the screen. Use Wheel A
to select the cue which is to have the Autoload set.
5> Press the Select button of the playback which is to be loaded.
The playback legend appears on the softkeys.
6> You can continue to add Autoloads to other cues, or press Exit
to finish.
The Autoloaded playback will be fired when the cue starts, and killed
when the cue list moves on to the next cue, unless you have also
loaded the playback into the next cue.
You can set options for each Autoloaded playback by pressing the
softkey where the Autoloaded playback is shown.
For a cue, the only option is [Remove this Autoload].
For a chase or cue list, softkey B lets you select whether to load the
playback from the start, to start at a specific cue, or to press Go on
the target playback.