Operator`s manual

9. Cue Lists - Page 159
TitanUniversal_Man_v7-0_PE.doc 02 September 2013
• You can reopen the cue list to add more cues by repeating the
procedure above; this does not affect any cues already stored
in the cue list.
• To add more cues to the end of the existing cues press [Append
cue].
• To edit an existing cue, press [Cue Number=] and type the cue
number to edit. Make the changes then press [Update Cue x].
• To insert new cues, see section
9.3.5.
• The Advanced Options menu allows you to renumber all the
cues, and to change the number of an existing cue.
• There is no limit to the number of cues in a cue list.
• Cue lists offer a Move In Dark function which will move fixtures
to the correct position for their next cue while they are set to
zero intensity. See section
9.6.10 on page 173.
• You can change the tracking mode of each cue. See section
9.6.9 on page 173.
9.1.2 Changing legends for cues in a cue list
You can set a legend for each cue, which is shown on the screen
when running the cue list and can be helpful for keeping track of
where you are.
1> Press [Set Legend] in the top level menu. If you are setting
legends for several cues, press Menu Latch to latch the Set
Legend menu.
2> Press the Select button of the Cue List.
3> The cues in the cue list are shown on the screen. Touch the list
or use Wheel A to select the cue which is to have a legend set.
5> Press [Cue Legend] and type the legend on the keyboard, then
press Enter.
6> If you latched the menu, you can continue to set legends for
other cues, or press Exit to finish.
9.1.3 Autoloading a playback within a cue list
You can program a cue within a cue list to automatically load one or
more playbacks when the cue fires. The playback can be a single cue,
a chase or another cue list. This can be a useful way to trigger chases
or effects from the cue list.
You can either automatically save active playbacks as Autoloads, or
you can manually allocate Autoloads to cues.
To automatically record active playbacks as Autoloads:
1> After selecting Cue List Record, turn on [Autoload Live
Playbacks] in the [Advanced Options] menu of the cuelist
record screen.
2> Turn on the playbacks you wish to load for this cue.
3> Save the cue. Active playbacks will be saved as Autoloads.